Your Cart is Empty
🔥 FREE DHL EXPRESS SHIPPING ON ORDERS AUD $1200+ 🔥
IK.200062
$1,498.00 AUD
CANBUSTER mounts to DJI Transmission and allows you to control Ronin 4D, Inspire 3, Ronin 2 and RS4 Pro with NODO Inertia Wheels!
For Ronin 4D and Inspire 3, control more than just the gimbal — adjust focus, iris, zoom and run/stop 🔥
Get the cleanest build possible by sending both Inertia Wheels control data and wireless video over DJI Transmission. Fewer cables. Fewer boxes.
Take advantage of Transmission's ultra-long wireless range of up to 4 miles to come up with truly extreme shots!
CANBUSTER is a unique collab product developed by Ignite Digi, Signal Audio and NODO Film Systems.
CANBUSTER is available at Ignite Digi, NODO Film Systems and in the near future NODO resellers.
Ready to use CANBUSTER? Quick set up now! →
Scroll for more info ↓
Using the Inertia Wheels API, CANBUSTER enables Inertia Wheels to control more parameters in both the gimbal and the camera. For Ronin 4D and Inspire 3, control focus, iris, zoom, run/stop and more. If using the DJI LiDAR Range Finder system you will have FIZon/FIZoff. For Ronin 2 and RS3 Pro you retain recenter, run/stop and full Pan/Tilt/Roll (PTR) control.
—————————
CANBUSTER can control the following:
Control PTR + Run/Stop + Recenter + Focus/Iris/Zoom + Mode Change + FIZon/FIZoff
—————————
Control PTR + Run/Stop + Recenter + Focus/Iris + FIZon/FIZoff
—————————
Control PTR + Run/Stop + Recenter + FIZon/FIZoff with DJI LiDAR Cable Hub
—————————
Control PTR + Run/Stop + Recenter + Focus + FIZon/FIZoff with DJI LiDAR Cable Hub
—————————
At present, Inertia Wheels FX and Playback/Record are not compatible as they are processed in the Inertia Wheels Receiver which is bypassed with CANBUSTER. A future firmware update for the Inertia Wheels is planned to enable these features.
CANBUSTER ships with a 24-inch Control Cable.
This length should cover most scenarios whether you're sitting or standing at your operating station.
If you need a spare or a longer 8ft version, tap the link below!
COMPATIBLE WITH
DJI Transmission
NODO Inertia Wheels Brushless
NODO Inertia Wheels MAX
MODULE MADE FROM
High-grade 6061-T651 aluminium billet
Hard anodised
IN THE BOX
CANBUSTER Module
24-inch / 60cm Control Cable
Holographic sticker
WEIGHT
4.3oz / 122g module only
DIMENSIONS
1.25 x 2.48 x 1.88” / 32 x 63 x 48mm
You may also be interested in our TB50 Expansion Pack for NODO Inertia Wheels and 2-Pin Lemo to DJI Transmission power cable.
Distribute reliable power from a TB50 battery to Inertia Wheels and the DJI High-Bright Remote Monitor.
Deliver higher voltage than a V-Lock or Gold Mount battery. This enables higher drag and mass settings before slipping.
Last but not least, feed in block battery power for longer runs times and to enable hot-swap!
You may also be interested in this Control Cable that allows you to connect the DJI LiDAR Range Finder and DJI Transmission while maintaining control of Ronin 2!
